欢迎光临上海乾拓贸易有限公司网站!
诚信促进发展,实力铸就品牌
服务热线:

18918572467

产品展示 / products 您的位置:网站首页 > 产品展示 > 美国ASCO电磁阀 > ASCO电磁阀 > -ASCO三通阀主要特点WPET8327B001
ASCO三通阀主要特点WPET8327B001

ASCO三通阀主要特点WPET8327B001

简要描述:ASCO三通阀主要特点WPET8327B001
mode (pilot and main). The pilot exhaust must
be connected to the main exhaust when the
air or inert gas cannot be exhausted to atmosphere.

产品型号: -

所属分类:ASCO电磁阀

更新时间:2021-06-17

厂商性质:经销商

详情介绍

ASCO三通阀主要特点WPET8327B001
These solenoid valves are intended
for use on clean dry air or inert
must be compatible with Nitrile
elastomers. Diester oils may cause
operational problems. Instrument
air in compliance with ANSI/ISA
Standard 7.0.01-1996 exceeds the
above requirements and is,
therefore, an acceptable media for these valves.
8553 Stainless Steel
-40°F to 140°F (-40°C to 60°C)
-13°F to 140°F (-25°C to 60°C)
8551 5°F to 140°F (-15°C to 60°C)
8551 Stainless Steel -4°F to 140°F (-20°C to 60°C)
Low Limit is the same as
Normal Temperature Ratings,
but High Limit is 176°F
Brass / Stainless Steel
8314 -40°F to 140°F (-40°C to 60°C)

ASCO三通阀主要特点WPET8327B001

8316* -20°F to 140°F (-29°C to 60°C)
8316 (Suffix V) 32°F to 140°F (0°C to 60°C)
8344 -4°F to 140°F (-20°C to 60°C)
gas, filtered to 40 micrometres or
better. The dew point of the media
should be at least 10°C (18° F)
below the minimum temperature
to which any portion of the clean
Pilot core discs are low-temperature NBR.
Adding Suffix V (FKM) does NOT change the
pilot core discs material. Suffix V (FKM)
 is not available on Series 8551 and 8553.
There are two exhaust flows in the exhaust
ASCO三通阀主要特点WPET8327B001
 



留言询价

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
在线咨询
点击这里给我发消息

沪公网安备 31011402005372号

扫一扫访问手机站扫一扫访问手机站
访问手机站